HIGH-STRENGTH, LIGHTWEIGHT TWO-PART EPOXY FILLER smooths out the rough spots and fills the voids; ideal for filling and fairing dents, holes and gouges on your boat, canoe or other watercraft. Marine-grade putty is also great for home, rv and auto repair.
Every fan demands a TotalBoat-409336 TotalFair Marine Epoxy Fairing Compound for Fiberglass, Wood, Aluminum and Steel (2 Quart Kit) they can show off their team pride. Browse our wide selection of TotalBoat-409336 TotalFair Marine Epoxy Fairing Compound for Fiberglass, Wood, Aluminum and Steel (2 Quart Kit) replica products to find the perfect version for you.
SUPER SMOOTH FINISH FOR PERMANENT, WATERPROOF REPAIRS: Marine filler bonds strongly to damaged areas and cures without pinholes on wood, aluminum, steel and fiberglass repair areas; cured TotalFair is waterproof; use above and below the waterline.
TotalBoat-409336 TotalFair Marine Epoxy Fairing Compound for Fiberglass, Wood, Aluminum and Steel (2 Quart Kit) products are designed for the fans. Team’s products are designed with the most advanced technologies for the best performance in the field.
NEW IMPROVED FORMULA EASY TO MIX AND APPLY: Foolproof 1 to 1 mix ratio – just mix blue and yellow components until they turn green. Now easier to scoop, mix, spread, and feather to a fine edge; won’t sag on vertical and overhead surfaces.
CURES FAST. EASY TO SAND AND PAINT: Quick-drying compound is ready to sand in just 4 hours at 80°F; cured fairing compound sands even easier with improved formula; compatible with latex and epoxy primers and paints.
CHOOSE KIT SIZE: 2-PINT KIT, 2-QUART KIT or 1-GALLON KIT. NOTE: TotalBoat Gelcoat should not be applied directly over TotalFair or gelcoat will not cure properly. Before applying gelcoat, apply TotalBoat 2-Part Epoxy Primer or TotalProtect over TotalFair.
